View UPG2159T5K_4203187.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

PRELIMINARY DATA SHEET GaAs INTEGRATED CIRCUIT
UPG2159T5K
L,S-BAND MINIATURE SPDT SWITCH
DESCRIPTION
The UPG2159T5K is a GaAs MMIC L,S-band SPDT (Single Pole Double Throw) switch designed for mobile phone and the other L,S-band applications. This device can operate from frequency 0.05GHz to 3.0GHz, with low insertion loss and high isolation This device is housed in a 6-pin TSSON (Thin Shrink Small Out-line Non-Leaded) package, and is suitable for high-density surface mounting.
FEATURES
Switch Control Voltage Low Insertion Loss : Vcont H = 1.8 to 3.3V 2.7V TYP. : Vcont L = -0.2 to 0.2V 0V TYP. : Lins1 = 0.20dB TYP.@ f = 0.05 to 0.5GHz, Vcont(H) = 2.7V, Vcont(L) = 0V : Lins2 = 0.21dB TYP.@ f = 0.5 to 1.0GHz, Vcont(H) = 2.7V, Vcont(L) = 0V : Lins3 = 0.23dB TYP.@ f = 1.0 to 2.0GHz, Vcont(H) = 2.7V, Vcont(L) = 0V : Lins4 = 0.25dB TYP.@ f = 2.0 to 2.5GHz, Vcont(H) = 2.7V, Vcont(L) = 0V : Lins5 = 0.27dB TYP.@ f = 2.5 to 3.0GHz, Vcont(H) = 2.7V, Vcont(L) = 0V : ISL1 = 27dB TYP. @ f = 0.05 to 0.5GHz, Vcont(H) = 2.7V, Vcont(L) = 0V : ISL2 = 27dB TYP. @ f = 0.5 to 1.0GHz, Vcont(H) = 2.7V, Vcont(L) = 0V : ISL3 = 27dB TYP. @ f = 1.0 to 2.0GHz, Vcont(H) = 2.7V, Vcont(L) = 0V : ISL4 = 27dB TYP. @ f = 2.0 to 2.5GHz, Vcont(H) = 2.7V, Vcont(L) = 0V : ISL5 = 27dB TYP. @ f = 2.5 to 3.0GHz, Vcont(H) = 2.7V, Vcont(L) = 0V : Pin 1dB = +25.5dBm TYP.@ f = 0.5 to 3.0GHz, Vcont(H) = 2.7V, Vcont(L) = 0V : Pin 0.1dB = +22.0dBm TYP.@ f = 0.5 to 3.0GHz, Vcont(H) = 2.7V, Vcont(L) = 0V : 6-pin TSSON package 1.0 1.0 0.37 mm
High Isolation
Power Handling High-density surface mounting
APPLICATIONS:
L,S-band digital cellular or cordless telephone W-LAN, Bluetooth , ZigBee, etc.
TM
ORDERING INFORMATION
Part Number UPG2159T5K-E2 Order Number UPG2159T5K-E2-A Package 6-pin plastic TSSON Pb-Free Marking G3 Supplying Form Embossed tape 8mm wide Pin 1, 6 face the perforation side of the tape Qty 5 kpcs/reel
Remark To order evaluation samples, contact your nearby sales office. Part number for sample order : UPG2159T5K-A
Caution Observe precautions when handling, because these devices are sensitive to electrostatic discharge.
The information in this document is subject to change without notice.Before using this document,please confirm that this is the latest version.
Document No. PG*****EJW5V0PDS ( 5nd edition ) Date Published November 2007 CP(K)
C NEC Elect onics Corporation 2007
UPG2159T5K
PIN CONNECTIONS AND INTERNAL BLOCK DIAGRAM
Pin No. 1 1 6 5 4 1 2 3 6 5 4 6 5 4 1 2 3 2 3 4 5 6 Pin Name OUTPUT1 GND OUTPUT2 Vcont2 INPUT Vcont1
Top View
Top View
Bottom View
G3
Vcont2 High Low Parameter
Note2 Note3
2 3
SW TRUTH TABLE
Vcont1 Low High INPUT-OUTPUT1 OFF ON INPUT-OUTPUT2 ON OFF
ASOLUTE MAXIMUM RATINGS
Unless otherwise specified, TA = +25
Symbol Ratings +6.0 +26.0 +8+Vcont 20/3 -45 to +85 -55 to +150 Unit V dBm dBm
Switch Control Voltage Input Power Input Power
Note1
Vcont Pin Pin TA Tstg
Operating Ambient Temperature Storage Temperature
Note1 Vcont1 - Vcont2 6.0V Note2 2.7 Vcont1 - Vcont2 3.3V 2.7V Note3 1.8 Vcont1 - Vcont2 Bm
Absolute MAX_Pin V.S. Vcont
RECOMMENDED OPERATING RANGE
Parameter Switch Control Voltage H Switch Control Voltage L Symbol Vcont Vcont
H L
Unless otherwise specified, TA = +25
MIN. 1.8 -0.2 TYP. 2.7 0 MAX. 3.3 0.2 Unit V V
2
Preliminary Data Sheet
Absolute MAX_Pin
UPG2159T5K
ELECTRICAL CHARACTERISTICS1 TA = +25 , Vcont(H) = 2.7V, Vcont(L) = 0V,DC blocking capacitors = 56pF,Unless otherwise specified
Parameter Insertion Loss1 Insertion Loss2 Insertion Loss3 Insertion Loss4 Insertion Loss5 Isolation1 Isolation2 Isolation3 Isolation4 Isolation5 Input Return Loss1 Input Return Loss2 Output Return Loss1 Output Return Loss2 0.1dB Loss Compression Input PowerNote2 1dB Loss Compression Input PowerNote3 2nd Harmonics 3rd Harmonics Input Intercept Point Switch Control Current Switch Control Speed Symbol Lins1 Lins2 Lins3 Lins4 Lins5 ISL1 ISL2 ISL3 ISL4 ISL5 RLin1 RLin2 RLout1 RLout2 Pin
0.1dB
Test Conditions f = 0.05 to 0.5GHzNote1 f = 0.5 to 1.0GHz f = 1.0 to 2.0GHz f = 2.0 to 2.5GHz f = 2.5 to 3.0GHz f = 0.05 to 0.5GHzNote1
MIN. 24 24 24 24 24 15 15 15 15 +20.0 65 60 -
TYP. 0.20 0.21 0.23 0.25 0.27 27 27 27 27 27 20 20 20 20 +22.0 +22.0 +25.5 77 80 +49.0 0.2 20
MAX. 0.35 0.35 0.40 0.42 0.45 1.0 200
Unit dB dB dB dB dB dB dB dB dB dB dB dB dB dB dBm dBm dBm dBc dBc dBm uA ns
f = 0.5 to 1.0GHz f = 1.0 to 2.0GHz f = 2.0 to 2.5GHz f = 2.5 to 3.0GHz f = 0.05 to 0.5GHzNote1 f = 0.5 to 3.0GHz f = 0.05 to 0.5GHzNote1 f = 0.5 to 3.0GHz f = 2.0GHz/2.5GHz f = 0.5 to 3.0GHz
Pin
1dB
f = 0.5 to 3.0GHz f = 2.0GHz/2.5GHz, Pin=+10dBm f = 2.0GHz/2.5GHz, Pin=+10dBm f = 0.5 to 3.0GHz, 2tone 5MHz spacing
2f0 3f0 IIP3 Icont tSW
50
CTL to 90/10
-
Note1. DC blocking capacitors = 1000pF 0.05 to 0.5GHz Note2. Pin 0.1dB is the measured input power level when the insertion loss increases 0.1dB more than that of linear range. Note3. Pin 1dB is the measured input power level when the insertion loss increases 1dB more than that of linear range.
Preliminary Data Sheet
3
UPG2159T5K
ELECTRICAL CHARACTERISTICS2 TA = +25 , Vcont(H) = 1.8V, Vcont(L) = 0V,DC blocking capacitors = 56pF,Unless otherwise specified
Parameter Insertion Loss6 Insertion Loss7 Insertion Loss8 Insertion Loss9 Insertion Loss10 Isolation6 Isolation7 Isolation8 Isolation9 Isolation10 Input Return Loss3 Input Return Loss4 Output Return Loss3 Output Return Loss4 0.1dB Loss Compression Input PowerNote2 1dB Loss Compression Input PowerNote3 Switch Control Current Switch Control Speed Symbol Lins6 Lins7 Lins8 Lins9 Lins10 ISL6 ISL7 ISL8 ISL9 ISL10 RLin3 RLin4 RLout3 RLout4 Pin
0.1dB
Test Conditions f = 0.05 to 0.5GHzNote1 f = 0.5 to 1.0GHz f = 1.0 to 2.0GHz f = 2.0 to 2.5GHz f = 2.5 to 3.0GHz f = 0.05 to 0.5GHzNote1
MIN. 23 23 23 23 23 15 15 15 15 12 -
TYP. 0.21 0.22 0.24 0.26 0.28 26 26 26 26 26 20 20 20 20 +15.5 +15.5 +19.5 0.2 20
MAX. 0.36 0.37 0.41 0.43 0.46 1.0 200
Unit dB dB dB dB dB dB dB dB dB dB dB dB dB dB dBm dBm dBm uA ns
f = 0.5 to 1.0GHz f = 1.0 to 2.0GHz f = 2.0 to 2.5GHz f = 2.5 to 3.0GHz f = 0.05 to 0.5GHzNote1 f = 0.5 to 3.0GHz f = 0.05 to 0.5GHzNote1 f = 0.5 to 3.0GHz f = 2.0GHz/2.5GHz f = 0.5 to 3.0GHz
Pin
1dB
f = 0.5 to 3.0GHz RF None 50 CTL to 90/10 RF
Icont tSW
-
Note1. DC blocking capacitors = 1000pF 0.05 to 0.5GHz Note2. Pin 0.1dB is the measured input power level when the insertion loss increases 0.1dB more than that of linear range. Note3. Pin 1dB is the measured input power level when the insertion loss increases 1dB more than that of linear range.
4
Preliminary Data Sheet
UPG2159T5K
EVALUATION CIRCUIT
Vcont1 INPUT Vcont2
C0 1000pF 6 5 4
1000pF
C0 : f = 0.05 to 0.5GHz 1000pF f = 0.5 to 3.0GHz 56pF
1 C0
2
3 C0
OUTPUT1
OUTPUT2
The application circuits and their parameters are for reference only and are not intended for use in actual design-ins.
Preliminary Data Sheet
5
UPG2159T5K
MOUNTING PAD AND SOLDER MASK LAYOUT DIMENSIONS 6-PIN PLASTIC TSSON UNIT: mm MOUNTING PAD
0.275 0.65
0.15
0.275
0.15
0.60
0.15 0.45 0.15 0.225 0.35 0.125 0.60 0.325 0.60 0.275
0.15
0.60
0.15
SOLDER MASK
0.20 0.13 0.20
0.60
0.13
0.13
0.15
0.275
0.275
0.60
0.13
0.45
0.13
0.075
0.225 0.60
0.375 0.60
Solder thickness:0.08 mm Remark The mounting pad and solder mask layouts in this document are for reference only.
6
Preliminary Date Sheet
0.13
0.15
UPG2159T5K
6-PIN TSSON UNIT: mm
Preliminary Data Sheet
7
UPG2159T5K
RECOMMENDED SOLDERING CONDITIONS
This product should be soldered and mounted under the following recommended conditions. For soldering methods and conditions other than those recommended below, contact your nearby sales office. Soldering Method Infrared Reflow Soldering Conditions Peak temperature package surface temperature Time at peak temperature Time at temperature of 220 or higher Preheating time at 120 to 180 Maximum number of reflow processes Maximum chlorine content of rosin flux mass Peak temperature molten solder temperature Time at peak temperature Preheating temperature package surface temperature Maximum number of reflow processes Maximum chlorine content of rosin flux mass Peak temperature pin temperature Soldering time per side of device Maximum chlorine content of rosin flux : 260 or below : 10 seconds or less : 60 seconds or less : 120 30 seconds : 3 times : 0.2 Wt. or below : 260 or below : 10 seconds or less : 120 or below : 1 time : 0.2 Wt. or below : 350 or below : 3 seconds or less : 0.2 Wt. or below Condition Symbol IR260
Wave soldering
WS260
Partial Heating
HS350
mass
Caution Do not use different soldering methods together
except for partial heating .
8
Preliminary Data Sheet
UPG2159T5K
Preliminary Data Sheet
9
UPG2159T5K
SAFETY INFORMATION ON THIS PRODUCT
Caution GaAs products The product contains gallium arsenide, GaAs. GaAs vapor and powder are hazardous to human health if inhaled or ingested. Do not destroy or burn the product. Do not cut or cleave off any part of the product. Do not crush or chemically dissolve the product. Do not put the product in the mouth. Follow related laws and ordinances for disposal. The product should be from general industrial waste or household garbage.
10
Preliminary Data Sheet
4590 Patrick Henry Drive Santa Clara, CA 95054-1817 Telephone: (408) 919-2500 Facsimile: (408) 988-0279
Subject: Compliance with EU Directives CEL certifies, to its knowledge, that semiconductor and laser products detailed below are compliant with the requirements of European Union (EU) Directive 2002/95/EC Restriction on Use of Hazardous Substances in electrical and electronic equipment (RoHS) and the requirements of EU Directive 2003/11/EC Restriction on Penta and Octa BDE. CEL Pb-free products have the same base part number with a suffix added. The suffix -A indicates that the device is Pb-free. The -AZ suffix is used to designate devices containing Pb which are exempted from the requirement of RoHS directive (*). In all cases the devices have Pb-free terminals. All devices with these suffixes meet the requirements of the RoHS directive. This status is based on CEL's understanding of the EU Directives and knowledge of the materials that go into its products as of the date of disclosure of this information.
Restricted Substance per RoHS Lead (Pb) Mercury Cadmium Hexavalent Chromium PBB PBDE Concentration Limit per RoHS (values are not yet fixed) < 1000 PPM < 1000 PPM < 100 PPM < 1000 PPM < 1000 PPM < 1000 PPM Concentration contained in CEL devices -A Not Detected Not Detected Not Detected Not Detected Not Detected Not Detected -AZ (*)
If you should have any additional questions regarding our devices and compliance to environmental standards, please do not hesitate to contact your local representative.
Important Information and Disclaimer: Information provided by CEL on its website or in other communications concerting the substance content of its products represents knowledge and belief as of the date that it is provided. CEL bases its knowledge and belief on information provided by third parties and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better integrate information from third parties. CEL has taken and continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals. CEL and CEL suppliers consider certain information to be proprietary, and thus CAS numbers and other limited information may not be available for release. In no event shall CEL's liability arising out of such information exceed the total purchase price of the CEL part(s) at issue sold by CEL to customer on an annual basis. See CEL Terms and Conditions for additional clarification of warranties and liability.

▲Up To Search▲

Price & Availability of UPG2159T5K

	To Download UPG2159T5K Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .